Yahia Workshops
صندوق أدوات المهندس — مجاني

Beam Formulas — M · V · δ

كمرة بحر واحد: Simply supported أو Cantilever أو Fixed–Fixed أو Propped، عليها حمل موزع وأحمال مركزة — ردود الأفعال وأقصى M و V والترخيم ومكانهم، مع الرسومات.

الأداة بتساعدك — المهندس المسؤول هو اللي بيراجع ويعتمد.

Defaults: IPE 300 (Iy 8356 cm⁴, Wel,y 557 cm³). Leave I empty for forces only. Use characteristic loads for the deflection and design loads for M and V.

  • Reaction RA (left)30.00kN
  • Reaction RB (right)30.00kN
  • Max sagging M+45.00kN·m @ 3.00 m
  • Max hogging M−0.00kN·m @ 0.00 m
  • Max shear |V|30.00kN @ 0.00 m
  • Max deflection δ9.62mm @ 3.00 m
  • Span / deflectionL/624
  • Bending stress |M|max / W80.8N/mm²
w = 10.0 kN/mShear V (kN) · max 30.030.0Moment M (kN·m) · max 45.045.0Deflection δ (mm) · max 9.69.6
Sagging M drawn below the axis (tension side). Deflection downward.
How it is calculated
  • Linear elastic, small deflections, constant EI; shear deformation neglected. The loads are added by superposition.
  • Closed-form beam-table formulas for each case (e.g. 5wL⁴/384EI, PL³/48EI, wL⁴/8EI, wL²/12, 3wL/8 for the propped cantilever).
  • Signs: sagging moment positive (drawn on the tension side, below the axis), shear positive upward on the left part, deflection downward positive.
  • The tool assists — the responsible engineer checks and approves.

اتعلم التصميم ده بالتفصيل

الأداة بتحسب. الكورس بيعلمك ليه وإزاي، على مشروع حقيقي.