Yahia Workshops
صندوق أدوات المهندس — مجاني

Rebar & Lap Length — EN 1992

مساحة ووزن الحديد (n Ø أو Ø@s)، واختيار الأسياخ من الـ As المطلوب، وطول الـ Anchorage والـ Lap حسب EN 1992-1-1 لكل الأقطار مرة واحدة.

  • EN 1992-1-1:2004 §8.4
  • EN 1992-1-1:2004 §8.7
  • Table 3.1

الأداة بتساعدك — المهندس المسؤول هو اللي بيراجع ويعتمد.

Bar area & weight

  • As804mm²
  • As8.04cm²
  • Mass6.31kg/m
  • Bars4

Anchorage & lap length — EN 1992-1-1 §8.4, §8.7

Straight bars, recommended values (γc 1.5, γs 1.15, αct 1.0). Defaults are on the safe side.

Fig. 8.2: good when h ≤ 250 mm, or the bar is within 250 mm of the bottom (h ≤ 600 mm), or more than 300 mm below the top (h > 600 mm); otherwise poor (typically top bars of deep beams).

  • Anchorage lbd, Ø16650mm
  • lbd / Ø40.3Ø
  • Lap l0, Ø16970mm
  • l0 / Ø60.4Ø
  1. fctd = αct·fctk,0.05/γc = 1.0·1.8/1.5 = 1.20 N/mm² (EN 1992-1-1 §3.1.6(2), Table 3.1)
  2. η1 = 1.0 (good bond, §8.4.2(2)), η2 = 1.00 (Ø 16 ≤ 32 mm)
  3. fbd = 2.25·η1·η2·fctd = 2.70 N/mm² (eq. 8.2)
  4. σsd = 1.00·fyd = 1.00·500/1.15 = 434.8 N/mm²
  5. lb,rqd = (Ø/4)·(σsd/fbd) = (16/4)·(434.8/2.70) = 644 mm (eq. 8.3)
  6. α1 = α2 = α3 = α4 = α5 = 1.0 (straight bar, no reductions — on the safe side)
  7. lbd = α2·lb,rqd = 644 mm ≥ lb,min = max(0.3·lb,rqd, 10Ø, 100) = 193 mm → lbd = 644 mm (eq. 8.4, 8.6/8.7)
  8. α6 = (ρ1/25)^0.5 = (100/25)^0.5 → 1.500 (1.0 ≤ α6 ≤ 1.5, Table 8.3)
  9. l0 = α2·α6·lb,rqd = 966 mm ≥ l0,min = max(0.3·α6·lb,rqd, 15Ø, 200) = 290 mm → l0 = 966 mm (eq. 8.10, 8.11)

All diameters — same settings (rounded up to 10 mm)

Ølb,rqdlbdl0l0 / Ø
833033049060
1041041061060
1249049073060
1457057085060
1665065097060
187307301,09060
208108101,21060
228908901,33060
251,0101,0101,51060
281,1301,1301,70060
321,2901,2901,94060
361,5101,5102,27063
401,7601,7602,63066

Not included: hooks/bends (α1), confinement by transverse bars (α3, α4) and transverse pressure (α5) — all taken as 1.0, which only adds length. Laps also need the transverse reinforcement of §8.7.4. The tool assists — the responsible engineer checks and approves.

Bar table — area and mass
Ø mmmm²kg/m2 bars mm²4 bars mm²@150 mm²/m
628.30.22257113188
850.30.395101201335
1078.50.617157314524
12113.10.888226452754
14153.91.2083086161,026
16201.11.5784028041,340
18254.51.9985091,0181,696
20314.22.4666281,2572,094
22380.12.9847601,5212,534
25490.93.8539821,9633,272
28615.84.8341,2322,4634,105
32804.26.3131,6083,2175,362
361,017.97.9902,0364,0726,786
401,256.69.8652,5135,0278,378

Area πز/4 · mass with 7850 kg/m³.