Built-up Section Properties — I · T · Box
Properties of any welded plate section in a second: A and mass per metre, Iy, Iz, iy, iz, Wel, Wpl, It, Iw, the shear centre and Av — with the section class for the grade.
- EN 1993-1-1:2005 Table 5.2
- EN 1993-1-5:2006 §4.4
- EN 10025-2:2004
The tool assists — the responsible engineer checks and approves.
- Area A110.8cm²
- Mass87.0kg/m
- Iy46,037cm⁴
- Iz2,137cm⁴
- Wpl,y2,096cm³
- It70.21cm⁴
- Class (S355)Compression 4 · Bending y 1
Section properties
Geometry
| Area A | 110.8 | cm² |
| Mass per metre | 86.98 | kg/m |
| Centroid from the bottom zG | 250.0 | mm |
| Plastic axis from the bottom zpl | 250.0 | mm |
| Shear centre from the bottom zS | 250.0 | mm |
Major axis y-y
| Iy | 46,037 | cm⁴ |
| iy | 20.38 | cm |
| Wel,y (top fibre) | 1,841 | cm³ |
| Wel,y (bottom fibre) | 1,841 | cm³ |
| Wpl,y | 2,096 | cm³ |
Minor axis z-z
| Iz | 2,137 | cm⁴ |
| iz | 4.39 | cm |
| Wel,z | 213.7 | cm³ |
| Wpl,z | 331.7 | cm³ |
Torsion & warping
| Torsion constant It | 70.21 | cm⁴ |
| Warping constant Iw | 1,249,365 | cm⁶ |
Shear & fire
| Shear area Av,z (load ∥ web) | 46.80 | cm² |
| Shear area Av,y (load ∥ flanges) | 64.00 | cm² |
| Painting surface (outer) | 1.780 | m²/m |
| Section factor Am/V, all sides | 161 | 1/m |
| Am/V, box protection | 126 | 1/m |
Yield strength (EN 10025-2)
| fy, top flange (t 16 mm) | 355 | N/mm² |
| fy, web (t 10 mm) | 355 | N/mm² |
Cross-section class — EN 1993-1-1 Table 5.2
Pure compression → Class 4
- Top flange outstands (outstand, ε 0.814)c/t = 5.9 · limits 7.3 / 8.1 / 11.41
- Bottom flange outstands (outstand, ε 0.814)c/t = 5.9 · limits 7.3 / 8.1 / 11.41
- Web (internal, ε 0.814)c/t = 46.8 · limits 26.8 / 30.9 / 34.24
Major-axis bending (top flange in compression) → Class 1
- Top flange outstands (outstand, ε 0.814)c/t = 5.9 · limits 7.3 / 8.1 / 11.41
- Web (internal, ε 0.814)c/t = 46.8 · limits 58.6 / 67.5 / 100.91
Major-axis bending, top flange in compression. Limits = Class 1 / 2 / 3.
Class 4 in compression → effective area Aeff = 100.2 cm² (90.4 % of A), EN 1993-1-5 §4.4 with ψ = 1.
ε = √(235/fy) of each plate from its own thickness (EN 10025-2). c measured without the welds (on the safe side).
How it is calculated
- Plates as rectangles, welds and root radii ignored. y-y = major axis, z-z = axis of symmetry; z measured from the bottom.
- Wpl about the equal-area (plastic) axis; Wel,y = the smaller of Iy / distance to the top and to the bottom fibre.
- It: open sections Σ b·t³/3; box: Bredt 4·Am²/∮ds/t on the mid-thickness line; plate: solid rectangle.
- Iw: I = If₁·If₂/(If₁ + If₂)·hs²; T = b³·tf³/144 + tw³·h′³/36; box ≈ 0 (closed). Shear centre of an I nearer the stiffer flange.
- Av (EN 1993-1-1 §6.2.6(3)) with η = 1.0: welded I and box Σ hw·tw, T 0.9·(A − b·tf).
- Am/V (EN 1993-1-2 §4.2.5): exposed on all sides — outer perimeter / A; box protection 2(b + h) / A. Mass with 7850 kg/m³.
- The tool assists — the responsible engineer checks and approves.
Learn this design in depth
The tool calculates. The course teaches you why and how, on a real project.